app

Kontrolliere den Ereignisverlauf deiner Anwendung.

Prozess: Haupt

Das folgende Beispiel zeigt, wie die Applikation beendet wird, wenn das letzte Fenster geschlossen wurde:

const { app } = require('electron')
app.on('window-all-closed', () => {
  app.quit()
})

Ereignisse

Das app Objekt stellt folgende Event zur Verfügung:

Event: 'will-finish-launching'

Wird ausgelöst wenn die Anwendung den grundlegenenden Start abgeschlossen hat. Unter Windows und Linux, hat das will-finish-launching-Ereignis das gleiche Verhalten wie das ready-Event; unter macOS, repräsentiert dieses Event die applicationWillFinishLaunching-Benachrichtung von NSApplication.

In den meisten Fällen, sollte man alles im ready Eventhandler machen.

Event: 'ready'

Kehrt zurück:

event Event
launchInfo Record<string, any> | NotificationResponse macOS

Wird einmal ausgesendet, wenn Electron die Initialisierung beendet hat. Auf macOS, launchInfo hält die userInfo der NSUserNotification oder Informationen von UNNotificationResponse fest, die verwendet wurden, um die Anwendung zu öffnen, wenn sie vom Benachrichtigungszentrum gestartet wurde. Sie können auch app.isReady() aufrufen, um zu überprüfen, ob dieses Event bereits abgefeuert wurde und app.whenReady(), um eine Promise zu erhalten, die bei der Initialisierung von Electron erfüllt wird.

Note: The ready event is only fired after the main process has finished running the first tick of the event loop. If an Electron API needs to be called before the ready event, ensure that it is called synchronously in the top-level context of the main process.

Event: 'window-all-closed'

Wird gefeuert, wenn alle Fenster geschlossen wurden.

Wenn du keinen einzigen Listener für dieses Event nutzt und alle Fenster geschlossen sind, ist die standardmäßige Handhabung des Events das Beenden der App. Wenn du allerdings auf das Event hörst, hast du die Kontrolle darüber, ob die App beendet werden soll oder nicht. Wenn entweder der Nutzer durch Drücken von Cmd + Q oder der Entwickler durch einen Aufruf von app.quit() die App zum Beenden bewegt, wird Electron zuerst versuchen alle Fenster zu schließen und danach erst das will-emit auslösen. In einem solchen Fall wird das window-all-closed Event übrigens überhaupt nicht ausgelöst.

Event: 'before-quit'

Kehrt zurück:

event Event

Ausgelöst, bevor sich die Fenster der Anwendung schließen. Ein Aufruf von event.preventDefault() verhindert das Standardverhalten, welches die Anwendung schließt.

Wichtig: Wenn das Beenden der App durch einen Aufruf von autoUpdater.quitAndInstall() initiiert wurde, wird das before-quit Event nach der Auslösung aller close Events für alle Fenster ausgelöst und diese werden geschlossen.

Hinweis: Wenn die Anwendung unter Windows beendet wird, weil das System heruntergefahren oder neu gestartet wird oder der Benutzer sich abmeldet, wird dieses Event nicht ausgelöst.

Event: 'before-quit'

Kehrt zurück:

event Event

Ausgelöst, wenn alle Fenster geschlossen sind und sich die Anwendung beenden wird. Ein Aufruf von event.preventDefault() verhindert das Standardverhalten, welches die Anwendung schließt.

Schau dir die Beschreibung/Dokumentation des window-all-closed Events an um die Unterschiede zwischen dem will-quit und dem window-all-closed Event zu verstehen.

Hinweis: Wenn die Anwendung unter Windows beendet wird, weil das System heruntergefahren oder neu gestartet wird oder der Benutzer sich abmeldet, wird dieses Event nicht ausgelöst.

Event: 'quit'

Kehrt zurück:

event Event
exitCode Integer

Wird ausgelöst wenn die App beendet wird.

Hinweis: Wenn die Anwendung unter Windows beendet wird, weil das System heruntergefahren oder neu gestartet wird oder der Benutzer sich abmeldet, wird dieses Event nicht ausgelöst.

Event: 'open-file' macOS

Kehrt zurück:

event Event
path string

Wird ausgelöst wenn der Nutzer versucht eine Datei mit der App zu öffnen. The open-file Event wird auch ausgelöst wenn die App bereits offen ist und das Betriebssystem die App nochmal zum Öffnen einer Datei benutzen will. open-file wird auch ausgelöst wenn eine Datei auf das Dock-Icon der App gezogen wird (macOS) und die App noch nicht gestartet ist. Behandle das open-file Event so früh wie möglich in deiner App um diesen Fall zu berücksichtigen (Also definitiv bevor das ready Event ausgelöst wird).

Du musst event.preventDefault() aufrufen um dieses Event selbst zu nutzen.

In Windows musst du process.argv (im Main-Prozess) parsen, um den Dateipfad zu erhalten.

Event: 'open-url' macOS

Kehrt zurück:

event Event
url string

Wird ausgelöst wenn der Nutzer versucht, eine URL mit der App zu öffnen. Die Info.plist Datei Ihre Anwendung muss das URL Schema mittels des CFBundleURLTypes Keys definieren und der NSPrincipalClass Key muss den Wert AtomApplication haben.

As with the open-file event, be sure to register a listener for the open-url event early in your application startup to detect if the application is being opened to handle a URL. If you register the listener in response to a ready event, you'll miss URLs that trigger the launch of your application.

Event: 'activate' macOS

Kehrt zurück:

event Event
hasVisibleWindows boolean

Wird ausgelöst wenn die App aktiviert wird. Eine ganze Menge an Aktionen können dieses Event auslösen. So zum Beispiel das Starten der App zum ersten mal als solches, eine Wiederbenutzung der App während sie bereits läuft oder einfach ein Klick auf das Dock oder Tastbar Icon der App.

Event: 'did-become-active' macOS

Kehrt zurück:

event Event

Emitted when the application becomes active. This differs from the activate event in that did-become-active is emitted every time the app becomes active, not only when Dock icon is clicked or application is re-launched. It is also emitted when a user switches to the app via the macOS App Switcher.

Event: 'did-resign-active' macOS

Kehrt zurück:

event Event

Emitted when the app is no longer active and doesn’t have focus. This can be triggered, for example, by clicking on another application or by using the macOS App Switcher to switch to another application.

Event: 'continue-activity' macOS

Kehrt zurück:

event Event
type string - Ein string zum Identifizieren der Aktivität. Maped auf NSUserActivity.activityType.
userInfo Object - Enthält den app-spezifischen Zustand, der von einer Aktivität auf einem anderen Gerät gespeichert wurde.
details Objekt
- webpageURL string (optional) - A string identifying the URL of the webpage accessed by the activity on another device, if available.

Emitted during Handoff when an activity from a different device wants to be resumed. Du solltest event.preventDefault() aufrufen wenn du dieses Event verwenden willst.

Eine Benutzeraktivität kann nur in einer App fortgesetzt werden, die die gleiche Entwicklerteam-ID als die Quell-App der Aktivität hat und den Typ der Aktivität unterstützt. Unterstützte Aktivitätstypen sind spezifiziert in Info.plist unter dem NSUserActivityTypes Schlüssel.

Event: 'will-continue-activity' macOS

Kehrt zurück:

event Event
type string - Ein string zum Identifizieren der Aktivität. Maped auf NSUserActivity.activityType.

Emitted during Handoff before an activity from a different device wants to be resumed. Du solltest event.preventDefault() aufrufen wenn du dieses Event verwenden willst.

Event: 'continue-activity-error' macOS

Kehrt zurück:

event Event
type string - Ein string zum Identifizieren der Aktivität. Maped auf NSUserActivity.activityType.
error string - Ein string mit der lokalisierten Beschreibung des Fehlers.

Wird während Handoff ausgelöst, wenn eine Aktivität von einem anderen Gerät nicht aufgenommen werden kann.

Event: 'activity-was-continued' macOS

Kehrt zurück:

event Event
type string - Ein string zum Identifizieren der Aktivität. Maped auf NSUserActivity.activityType.
userInfo unknown - Enthält app-spezifischen Zustand, der von der Aktivität gespeichert wird.

Emitted during Handoff after an activity from this device was successfully resumed on another one.

Event: 'update-activity-state' macOS

Kehrt zurück:

event Event
type string - Ein string zum Identifizieren der Aktivität. Maped auf NSUserActivity.activityType.
userInfo unknown - Enthält app-spezifischen Zustand, der von der Aktivität gespeichert wird.

Emitted when Handoff is about to be resumed on another device. Wenn Sie den zu übertragenden Status aktualisieren müssen, sollten Sie event.preventDefault() sofort aufrufen, ein neues userInfo-Wörterbuch erstellen und app.updateCurrentActivity() zeitnah aufrufen. Andernfalls wird die Operation fehlschlagen und Continue-Activity-error wird aufgerufen.

Event: 'new-window-for-tab' macOS

Kehrt zurück:

event Event

Emittiert, wenn der Benutzer auf die neue Registerkarte macOS mit systemeigenem MacOS klickt. The new tab button is only visible if the current BrowserWindow has a tabbingIdentifier

Event: 'browser-window-blur'

Kehrt zurück:

event Event
window BrowserWindow

Emitted when a browserWindow gets blurred.

Event: 'browser-window-focus'

Kehrt zurück:

event Event
window BrowserWindow

Emitted when a browserWindow gets focused.

Event: 'browser-window-created'

Kehrt zurück:

event Event
window BrowserWindow

Emitted when a new browserWindow is created.

Event: 'web-contents-created'

Kehrt zurück:

event Event
webContents WebContents

Emitted when a new webContents is created.

Event: 'certificate-error'

Kehrt zurück:

event Event
webContents WebContents
url string
error string - Der Fehlercode
certificate Certificate
callback Function
- isTrusted boolean - Gibt an ob das Zertifikat als vertrauenswürdig angesehen werden soll
isMainFrame boolean

Emittiert wenn die Verifizierung des certificate für die url fehlschlägt, um dem Zertifikat dennoch zu vertrauen müssen die das normale Verhalten abschalten mit event.preventDefault() und callback(true) aufrufen.

const { app } = require('electron')

app.on('certificate-error', (event, webContents, url, error, certificate, callback) => {
  if (url === 'https://github.com') {
    // Verification logic.
    event.preventDefault()
    callback(true)
  } else {
    callback(false)
  }
})

Event: 'select-client-certificate'

Kehrt zurück:

event Event
webContents WebContents
url URL
certificateList Certificate[]
callback Function
- certificate Certificate (optional)

Emittiert wenn ein Client Zertifikat angefordert wird.

Die url entspricht dem Navigationseintrag, der das Client-Zertifikat anfordert und Callback kann mit einem Eintrag aufgerufen werden, der aus der Liste gefiltert wird. Die Verwendung von event.preventDefault() verhindert, dass die App das erste Zertifikat aus dem Store verwendet.

const { app } = require('electron')

app.on('select-client-certificate', (event, webContents, url, list, callback) => {
  event.preventDefault()
  callback(list[0])
})

Kehrt zurück:

event Event
webContents WebContents (optional)
authenticationResponseDetails Object
- url URL
- pid number
authInfo Objekt
- isProxy boolean
- scheme string
- host string
- port Integer
- realm string
callback Function
- username string (optional)
- password string (optional)

Emitted when webContents or Utility process wants to do basic auth.

Standardmäßig werden alle Authentifizierungen abgebrochen. To override this you should prevent the default behavior with event.preventDefault() and call callback(username, password) with the credentials.

const { app } = require('electron')

app.on('login', (event, webContents, details, authInfo, callback) => {
  event.preventDefault()
  callback('username', 'secret')
})

If callback is called without a username or password, the authentication request will be cancelled and the authentication error will be returned to the page.

Event: 'gpu-info-update'

Emitted whenever there is a GPU info update.

Event: 'render-process-gone'

Kehrt zurück:

event Event
webContents WebContents
details RenderProcessGoneDetails

Emitted when the renderer process unexpectedly disappears. This is normally because it was crashed or killed.

Event: 'child-process-gone'

Kehrt zurück:

event Event
details Objekt
- type string - Prozess-Typ. Einer der folgenden Werte:
  - Utility
  - Zygote
  - Sandbox helper
  - GPU
  - Pepper Plugin
  - Pepper Plugin Broker
  - Unknown
- reason string - Der Grund, warum der Child-Prozess nicht mehr funktioniert. Mögliche werte:
  - clean-exit - Prozess beendet mit einem Exitcode von Null
  - abnormal-exit - Process exited with a non-zero exit code
  - killed - Process was sent a SIGTERM or otherwise killed externally
  - crashed - Prozess abgestürzt
  - oom - Process ran out of memory
  - launch-failed - Process never successfully launched
  - integrity-failure - Windows code integrity checks failed
- exitCode number - The exit code for the process (e.g. status from waitpid if on posix, from GetExitCodeProcess on Windows).
- serviceName string (optional) - The non-localized name of the process.
- name string (optional) - Der Name des Prozesses. Beispiele für Hilfsmittel: Audio Service, Content Decryption Module Service, Network Service, Video Capture, etc.

Emitted when the child process unexpectedly disappears. This is normally because it was crashed or killed. It does not include renderer processes.

Event: 'accessibility-support-changed' macOS Windows

Kehrt zurück:

event Event
accessibilitySupportEnabled boolean - true, wenn Chromes Barrierefreiheit Unterstützung aktiviert ist, ansonsten false.

Emitted when Chrome's accessibility support changes. This event fires when assistive technologies, such as screen readers, are enabled or disabled. See https://www.chromium.org/developers/design-documents/accessibility for more details.

Event: 'session-created'

Kehrt zurück:

session Session

Emittiert wenn Electron eine neue Session erstellt.

const { app } = require('electron')

app.on('session-created', (session) => {
  console.log(session)
})

Event: 'second-instance'

Kehrt zurück:

event Event
argv string[] - An array of the second instance's command line arguments
workingDirectory string - The second instance's working directory
additionalData unknown - A JSON object of additional data passed from the second instance

This event will be emitted inside the primary instance of your application when a second instance has been executed and calls app.requestSingleInstanceLock().

argv is an Array of the second instance's command line arguments, and workingDirectory is its current working directory. Usually applications respond to this by making their primary window focused and non-minimized.

Note: argv will not be exactly the same list of arguments as those passed to the second instance. The order might change and additional arguments might be appended. If you need to maintain the exact same arguments, it's advised to use additionalData instead.

Note: If the second instance is started by a different user than the first, the argv array will not include the arguments.

This event is guaranteed to be emitted after the ready event of app gets emitted.

Hinweis: Zusätzliche Kommandozeilenargumente könnten von Chromium hinzugefügt werden, wie --original-process-start-time.

Methoden

Das app Objekt enthält die folgenden Methoden:

Hinweis: Manche Methoden sind nur auf spezifischen Betriebssystemen verfügbar und sind dementsprechend gekennzeichnet.

`app.quit()`

Versucht sämtliche Fenster zu schließen. Das before-quit Ereignis wird zuerst aufgerufen. Wurden alle Fenster erfolgreich geschlossen, wird das will-quit Ereignis aufgerufen und die Anwendung wird standardmäßig terminiert.

This method guarantees that all beforeunload and unload event handlers are correctly executed. It is possible that a window cancels the quitting by returning false in the beforeunload event handler.

`app.exit([exitCode])`

exitCode Integer (optional)

Exits immediately with exitCode. exitCode defaults to 0.

All windows will be closed immediately without asking the user, and the before-quit and will-quit events will not be emitted.

`app.relaunch([options])`

options Object (optional)
- args string[] (optional)
- execPath string (optional)

Relaunches the app when current instance exits.

By default, the new instance will use the same working directory and command line arguments with current instance. When args is specified, the args will be passed as command line arguments instead. When execPath is specified, the execPath will be executed for relaunch instead of current app.

Note that this method does not quit the app when executed, you have to call app.quit or app.exit after calling app.relaunch to make the app restart.

When app.relaunch is called for multiple times, multiple instances will be started after current instance exited.

An example of restarting current instance immediately and adding a new command line argument to the new instance:

const { app } = require('electron')

app.relaunch({ args: process.argv.slice(1).concat(['--relaunch']) })
app.exit(0)

`app.isReady()`

Gibt boolean - true zurück, wenn Electron das Initialisieren beendet hat, ansonsten false. See also app.whenReady().

`app.whenReady()`

Returns Promise<void> - fulfilled when Electron is initialized. May be used as a convenient alternative to checking app.isReady() and subscribing to the ready event if the app is not ready yet.

`app.focus([options])`

options Object (optional)
- steal boolean macOS - Make the receiver the active app even if another app is currently active.

On Linux, focuses on the first visible window. On macOS, makes the application the active app. On Windows, focuses on the application's first window.

Du solltest versuchen, die steal Option so selten wie möglich zu verwenden.

`app.hide()` macOS

Blendet alle Anwendungsfenster aus ohne sie zu minimieren.

`app.isHidden()` macOS

Returns boolean - true if the application—including all of its windows—is hidden (e.g. with Command-H), false otherwise.

`app.show()` macOS

Shows application windows after they were hidden. Fokussiert diese nicht automatisch.

`app.setAppLogsPath([path])`

path string (optional) - A custom path for your logs. Must be absolute.

Sets or creates a directory your app's logs which can then be manipulated with app.getPath() or app.setPath(pathName, newPath).

Calling app.setAppLogsPath() without a path parameter will result in this directory being set to ~/Library/Logs/YourAppName on macOS, and inside the userData directory on Linux and Windows.

`app.getAppPath()`

Returns string - The current application directory.

`app.getPath(name)`

name string - You can request the following paths by the name:
- home Des Benutzers Home Verzeichnis.
- appData Per-user application data directory, which by default points to:
  - %APPDATA% in Windows
  - $XDG_CONFIG_HOME oder ~/.config in Linux
  - ~/Library/Application Support in macOS
- userData The directory for storing your app's configuration files, which by default is the appData directory appended with your app's name. By convention files storing user data should be written to this directory, and it is not recommended to write large files here because some environments may backup this directory to cloud storage.
- sessionData The directory for storing data generated by Session, such as localStorage, cookies, disk cache, downloaded dictionaries, network state, devtools files. By default this points to userData. Chromium may write very large disk cache here, so if your app does not rely on browser storage like localStorage or cookies to save user data, it is recommended to set this directory to other locations to avoid polluting the userData directory.
- temp Temporäres Verzeichnis.
- exe Die aktuell ausführbare Datei.
- module Die libchromiumcontent Bibliothek.
- desktop Das Desktop Verzeichnis des aktuellen Benuters.
- documents Directory for a user's "My Documents".
- downloads "Downloads" Verzeichnis des aktuellen Benutzers.
- music Musik Verzeichnis des aktuellen Benutzers.
- pictures Bilder Verzeichnis des aktuellen Benutzers.
- videos Filme Verzeichnis des aktuellen Benutzers.
- recent Directory for the user's recent files (Windows only).
- logs Verzeichnis für die Logfiles deiner App.
- crashDumps Directory where crash dumps are stored.

Returns string - A path to a special directory or file associated with name. On failure, an Error is thrown.

If app.getPath('logs') is called without called app.setAppLogsPath() being called first, a default log directory will be created equivalent to calling app.setAppLogsPath() without a path parameter.

`app.getFileIcon(path[, options])`

path string
options Object (optional)
- size string
  - small - 16x16
  - normal - 32x32
  - large - 48x48 in Linux, 32x32 in Windows, wird in macOS nicht unterstützt.

Returns Promise<NativeImage> - fulfilled with the app's icon, which is a NativeImage.

Ruft das zugeordnete Symbol eines Pfades ab.

In Windows gibt es zwei arten von Icons:

Icons welche den verschiedenen Dateiendungen zugeordnet sind, wie .mp3, .png, usw.
Icons welche in der Datei selbst stecken, wie .exe, .dll, .ico.

On Linux and macOS, icons depend on the application associated with file mime type.

`app.setPath(name, path)`

name string
path string

Overrides the path to a special directory or file associated with name. If the path specifies a directory that does not exist, an Error is thrown. In that case, the directory should be created with fs.mkdirSync or similar.

You can only override paths of a name defined in app.getPath.

By default, web pages' cookies and caches will be stored under the sessionData directory. If you want to change this location, you have to override the sessionData path before the ready event of the app module is emitted.

`app.getVersion()`

Returns string - The version of the loaded application. If no version is found in the application's package.json file, the version of the current bundle or executable is returned.

`app.getName()`

Returns string - The current application's name, which is the name in the application's package.json file.

Usually the name field of package.json is a short lowercase name, according to the npm modules spec. You should usually also specify a productName field, which is your application's full capitalized name, and which will be preferred over name by Electron.

`app.setName(name)`

name string

Überschreibt den Namen der aktuellen Anwendung.

Note: This function overrides the name used internally by Electron; it does not affect the name that the OS uses.

`app.getLocale()`

Returns string - The current application locale, fetched using Chromium's l10n_util library. Possible return values are documented here.

To set the locale, you'll want to use a command line switch at app startup, which may be found here.

Note: When distributing your packaged app, you have to also ship the locales folder.

Note: This API must be called after the ready event is emitted.

Note: To see example return values of this API compared to other locale and language APIs, see app.getPreferredSystemLanguages().

`app.getLocaleCountryCode()`

Returns string - User operating system's locale two-letter ISO 3166 country code. The value is taken from native OS APIs.

Note: When unable to detect locale country code, it returns empty string.

`app.getSystemLocale()`

Returns string - The current system locale. On Windows and Linux, it is fetched using Chromium's i18n library. On macOS, [NSLocale currentLocale] is used instead. To get the user's current system language, which is not always the same as the locale, it is better to use app.getPreferredSystemLanguages().

Different operating systems also use the regional data differently:

Windows 11 uses the regional format for numbers, dates, and times.
macOS Monterey uses the region for formatting numbers, dates, times, and for selecting the currency symbol to use.

Therefore, this API can be used for purposes such as choosing a format for rendering dates and times in a calendar app, especially when the developer wants the format to be consistent with the OS.

Note: This API must be called after the ready event is emitted.

Note: To see example return values of this API compared to other locale and language APIs, see app.getPreferredSystemLanguages().

`app.getPreferredSystemLanguages()`

Returns string[] - The user's preferred system languages from most preferred to least preferred, including the country codes if applicable. A user can modify and add to this list on Windows or macOS through the Language and Region settings.

The API uses GlobalizationPreferences (with a fallback to GetSystemPreferredUILanguages) on Windows, \[NSLocale preferredLanguages\] on macOS, and g_get_language_names on Linux.

This API can be used for purposes such as deciding what language to present the application in.

Here are some examples of return values of the various language and locale APIs with different configurations:

On Windows, given application locale is German, the regional format is Finnish (Finland), and the preferred system languages from most to least preferred are French (Canada), English (US), Simplified Chinese (China), Finnish, and Spanish (Latin America):

app.getLocale() // 'de'
app.getSystemLocale() // 'fi-FI'
app.getPreferredSystemLanguages() // ['fr-CA', 'en-US', 'zh-Hans-CN', 'fi', 'es-419']

On macOS, given the application locale is German, the region is Finland, and the preferred system languages from most to least preferred are French (Canada), English (US), Simplified Chinese, and Spanish (Latin America):

app.getLocale() // 'de'
app.getSystemLocale() // 'fr-FI'
app.getPreferredSystemLanguages() // ['fr-CA', 'en-US', 'zh-Hans-FI', 'es-419']

Both the available languages and regions and the possible return values differ between the two operating systems.

As can be seen with the example above, on Windows, it is possible that a preferred system language has no country code, and that one of the preferred system languages corresponds with the language used for the regional format. On macOS, the region serves more as a default country code: the user doesn't need to have Finnish as a preferred language to use Finland as the region,and the country code FI is used as the country code for preferred system languages that do not have associated countries in the language name.

`app.addRecentDocument(path)` macOS Windows

path string

Adds path to the recent documents list.

This list is managed by the OS. On Windows, you can visit the list from the task bar, and on macOS, you can visit it from dock menu.

`app.clearRecentDocuments()` macOS Windows

Leere die zuletzt verwendete Dokumenten Liste.

`app.setAsDefaultProtocolClient(protocol[, path, args])`

protocol string - The name of your protocol, without ://. For example, if you want your app to handle electron:// links, call this method with electron as the parameter.
path string (optional) Windows - The path to the Electron executable. Standardwert ist process.execPath
args string[] (optional) Windows - Arguments passed to the executable. Defaults to an empty array

Returns boolean - Whether the call succeeded.

Sets the current executable as the default handler for a protocol (aka URI scheme). It allows you to integrate your app deeper into the operating system. Once registered, all links with your-protocol:// will be opened with the current executable. The whole link, including protocol, will be passed to your application as a parameter.

Note: On macOS, you can only register protocols that have been added to your app's info.plist, which cannot be modified at runtime. However, you can change the file during build time via Electron Forge, Electron Packager, or by editing info.plist with a text editor. Please refer to Apple's documentation for details.

Note: In a Windows Store environment (when packaged as an appx) this API will return true for all calls but the registry key it sets won't be accessible by other applications. In order to register your Windows Store application as a default protocol handler you must declare the protocol in your manifest.

The API uses the Windows Registry and LSSetDefaultHandlerForURLScheme internally.

`app.removeAsDefaultProtocolClient(protocol[, path, args])` macOS Windows

protocol string - The name of your protocol, without ://.
path string (optional) Windows - Standard process.execPath
args string[] (optional) Windows - Defaults to an empty array

Returns boolean - Whether the call succeeded.

This method checks if the current executable as the default handler for a protocol (aka URI scheme). If so, it will remove the app as the default handler.

`app.isDefaultProtocolClient(protocol[, path, args])`

protocol string - The name of your protocol, without ://.
path string (optional) Windows - Standard process.execPath
args string[] (optional) Windows - Defaults to an empty array

Returns boolean - Whether the current executable is the default handler for a protocol (aka URI scheme).

Note: On macOS, you can use this method to check if the app has been registered as the default protocol handler for a protocol. You can also verify this by checking ~/Library/Preferences/com.apple.LaunchServices.plist on the macOS machine. Please refer to Apple's documentation for details.

The API uses the Windows Registry and LSCopyDefaultHandlerForURLScheme internally.

`app.getApplicationNameForProtocol(url)`

url string - a URL with the protocol name to check. Unlike the other methods in this family, this accepts an entire URL, including :// at a minimum (e.g. https://).

Returns string - Name of the application handling the protocol, or an empty string if there is no handler. For instance, if Electron is the default handler of the URL, this could be Electron on Windows and Mac. However, don't rely on the precise format which is not guaranteed to remain unchanged. Expect a different format on Linux, possibly with a .desktop suffix.

This method returns the application name of the default handler for the protocol (aka URI scheme) of a URL.

`app.getApplicationInfoForProtocol(url)` macOS Windows

url string - a URL with the protocol name to check. Unlike the other methods in this family, this accepts an entire URL, including :// at a minimum (e.g. https://).

Returns Promise<Object> - Resolve with an object containing the following:

icon NativeImage - the display icon of the app handling the protocol.
path string - installation path of the app handling the protocol.
name string - display name of the app handling the protocol.

This method returns a promise that contains the application name, icon and path of the default handler for the protocol (aka URI scheme) of a URL.

`app.setUserTasks(tasks)` Windows

tasks Task[] - Array mit Task Objekten

Adds tasks to the Tasks category of the Jump List on Windows.

tasks Ein Array mit Task Objekten.

Returns boolean - Whether the call succeeded.

Hinweis: Wenn du die Jump List weiter anpassen möchtest, dann verwende statt dessen die app.setJumpList(categories).

`app.getJumpListSettings()` Windows

Gibt das Object zurück:

minItems Integer - The minimum number of items that will be shown in the Jump List (for a more detailed description of this value see the MSDN docs).
removedItems JumpListItem[] - Array of JumpListItem objects that correspond to items that the user has explicitly removed from custom categories in the Jump List. These items must not be re-added to the Jump List in the next call to app.setJumpList(), Windows will not display any custom category that contains any of the removed items.

`app.setJumpList(categories)` Windows

categories JumpListCategory[] | null - Array of JumpListCategory objects.

Gibt das string zurück

Sets or removes a custom Jump List for the application, and returns one of the following strings:

ok - Nichts ist schief gelaufen.
error - One or more errors occurred, enable runtime logging to figure out the likely cause.
invalidSeparatorError - An attempt was made to add a separator to a custom category in the Jump List. Separators are only allowed in the standard Tasks category.
fileTypeRegistrationError - An attempt was made to add a file link to the Jump List for a file type the app isn't registered to handle.
customCategoryAccessDeniedError - Custom categories can't be added to the Jump List due to user privacy or group policy settings.

If categories is null the previously set custom Jump List (if any) will be replaced by the standard Jump List for the app (managed by Windows).

Anmerkung: Wenn eine JumpListCategoryObjekt nie den Typ nie den <code>Namen hat Die eingestellte Funktion von seinem Typ ist dann als <code>taskswahrgenommen. Wenn die Eigenschaft name gesetzt ist, aber die Eigenschaft type weggelassen wird, dann wird angenommen, dass die Eigenschaft type custom ist.

Note: Users can remove items from custom categories, and Windows will not allow a removed item to be added back into a custom category until after the next successful call to app.setJumpList(categories). Any attempt to re-add a removed item to a custom category earlier than that will result in the entire custom category being omitted from the Jump List. The list of removed items can be obtained using app.getJumpListSettings().

Hinweis: Die maximale Länge derdescription-Eigenschaft eines Jump List-Elements beträgt 260 Zeichen. Bei Überschreitung dieser Grenze wird das Element weder in die Jump List aufgenommen noch angezeigt.

Hier ist ein einfaches Beispiel, wie man eine eigene Jump List anlegt:

const { app } = require('electron')

app.setJumpList([
  {
    type: 'custom',
    name: 'Recent Projects',
    items: [
      { type: 'file', path: 'C:\\Projects\\project1.proj' },
      { type: 'file', path: 'C:\\Projects\\project2.proj' }
    ]
  },
  { // has a name so `type` is assumed to be "custom"
    name: 'Tools',
    items: [
      {
        type: 'task',
        title: 'Tool A',
        program: process.execPath,
        args: '--run-tool-a',
        iconPath: process.execPath,
        iconIndex: 0,
        description: 'Runs Tool A'
      },
      {
        type: 'task',
        title: 'Tool B',
        program: process.execPath,
        args: '--run-tool-b',
        iconPath: process.execPath,
        iconIndex: 0,
        description: 'Runs Tool B'
      }
    ]
  },
  { type: 'frequent' },
  { // has no name and no type so `type` is assumed to be "tasks"
    items: [
      {
        type: 'task',
        title: 'New Project',
        program: process.execPath,
        args: '--new-project',
        description: 'Create a new project.'
      },
      { type: 'separator' },
      {
        type: 'task',
        title: 'Recover Project',
        program: process.execPath,
        args: '--recover-project',
        description: 'Recover Project'
      }
    ]
  }
])

`app.requestSingleInstanceLock([additionalData])`

additionalData Record<any, any> (optional) - A JSON object containing additional data to send to the first instance.

Gibt boolean zurück

The return value of this method indicates whether or not this instance of your application successfully obtained the lock. If it failed to obtain the lock, you can assume that another instance of your application is already running with the lock and exit immediately.

I.e. This method returns true if your process is the primary instance of your application and your app should continue loading. It returns false if your process should immediately quit as it has sent its parameters to another instance that has already acquired the lock.

On macOS, the system enforces single instance automatically when users try to open a second instance of your app in Finder, and the open-file and open-url events will be emitted for that. However when users start your app in command line, the system's single instance mechanism will be bypassed, and you have to use this method to ensure single instance.

An example of activating the window of primary instance when a second instance starts:

const { app, BrowserWindow } = require('electron')
let myWindow = null

const additionalData = { myKey: 'myValue' }
const gotTheLock = app.requestSingleInstanceLock(additionalData)

if (!gotTheLock) {
  app.quit()
} else {
  app.on('second-instance', (event, commandLine, workingDirectory, additionalData) => {
    // Print out data received from the second instance.
    console.log(additionalData)

    // Someone tried to run a second instance, we should focus our window.
    if (myWindow) {
      if (myWindow.isMinimized()) myWindow.restore()
      myWindow.focus()
    }
  })

  app.whenReady().then(() => {
    myWindow = new BrowserWindow({})
    myWindow.loadURL('https://electronjs.org')
  })
}

`app.hasSingleInstanceLock()`

Gibt boolean zurück

This method returns whether or not this instance of your app is currently holding the single instance lock. You can request the lock with app.requestSingleInstanceLock() and release with app.releaseSingleInstanceLock()

`app.releaseSingleInstanceLock()`

Releases all locks that were created by requestSingleInstanceLock. This will allow multiple instances of the application to once again run side by side.

`app.setUserActivity(type, userInfo[, webpageURL])` macOS

type string - Uniquely identifies the activity. Maped auf NSUserActivity.activityType.
userInfo any - App-specific state to store for use by another device.
webpageURL string (optional) - The webpage to load in a browser if no suitable app is installed on the resuming device. The scheme must be http or https.

Creates an NSUserActivity and sets it as the current activity. The activity is eligible for Handoff to another device afterward.

`app.getCurrentActivityType()` macOS

Returns string - Typ der aktuell laufenden Aktivität.

`app.invalidateCurrentActivity()` macOS

Invalidates the current Handoff user activity.

`app.resignCurrentActivity()` macOS

Marks the current Handoff user activity as inactive without invalidating it.

`app.updateCurrentActivity(type, userInfo)` macOS

type string - Uniquely identifies the activity. Maped auf NSUserActivity.activityType.
userInfo any - App-specific state to store for use by another device.

Updates the current activity if its type matches type, merging the entries from userInfo into its current userInfo dictionary.

`app.setAppUserModelId(id)` Windows

id string

Changes the Application User Model ID to id.

`app.setActivationPolicy(policy)` macOS

policy string - Can be 'regular', 'accessory', or 'prohibited'.

Sets the activation policy for a given app.

Activation policy types:

'regular' - The application is an ordinary app that appears in the Dock and may have a user interface.
'accessory' - The application doesn’t appear in the Dock and doesn’t have a menu bar, but it may be activated programmatically or by clicking on one of its windows.
'prohibited' - The application doesn’t appear in the Dock and may not create windows or be activated.

`app.importCertificate(options, callback)` Linux

options Objekt
- certificate string - Pfad zur pkcs12 Datei.
- password string - Passphrase des Zertifikats.
callback Function
- result Integer - Resultat des Imports.

Imports the certificate in pkcs12 format into the platform certificate store. callback is called with the result of import operation, a value of 0 indicates success while any other value indicates failure according to Chromium net_error_list.

`app.configureHostResolver(options)`

options Objekt
- enableBuiltInResolver boolean (optional) - Whether the built-in host resolver is used in preference to getaddrinfo. When enabled, the built-in resolver will attempt to use the system's DNS settings to do DNS lookups itself. Enabled by default on macOS, disabled by default on Windows and Linux.
- secureDnsMode string (optional) - Can be 'off', 'automatic' or 'secure'. Configures the DNS-over-HTTP mode. When 'off', no DoH lookups will be performed. When 'automatic', DoH lookups will be performed first if DoH is available, and insecure DNS lookups will be performed as a fallback. When 'secure', only DoH lookups will be performed. Defaults to 'automatic'.
- secureDnsServers string[] (optional) - A list of DNS-over-HTTP server templates. See RFC8484 § 3 for details on the template format. Most servers support the POST method; the template for such servers is simply a URI. Note that for some DNS providers, the resolver will automatically upgrade to DoH unless DoH is explicitly disabled, even if there are no DoH servers provided in this list.
- enableAdditionalDnsQueryTypes boolean (optional) - Controls whether additional DNS query types, e.g. HTTPS (DNS type 65) will be allowed besides the traditional A and AAAA queries when a request is being made via insecure DNS. Has no effect on Secure DNS which always allows additional types. Standard ist true.

Configures host resolution (DNS and DNS-over-HTTPS). By default, the following resolvers will be used, in order:

DNS-over-HTTPS, if the DNS provider supports it, then
the built-in resolver (enabled on macOS only by default), then
the system's resolver (e.g. getaddrinfo).

This can be configured to either restrict usage of non-encrypted DNS (secureDnsMode: "secure"), or disable DNS-over-HTTPS (secureDnsMode: "off"). It is also possible to enable or disable the built-in resolver.

To disable insecure DNS, you can specify a secureDnsMode of "secure". If you do so, you should make sure to provide a list of DNS-over-HTTPS servers to use, in case the user's DNS configuration does not include a provider that supports DoH.

const { app } = require('electron')

app.whenReady().then(() => {
  app.configureHostResolver({
    secureDnsMode: 'secure',
    secureDnsServers: [
      'https://cloudflare-dns.com/dns-query'
    ]
  })
})

This API must be called after the ready event is emitted.

`app.disableHardwareAcceleration()`

Schaltet die Hardware Beschleunigung für die aktuelle App ab.

Diese Methode kann nur vor dem Start der App aufgerufen werden.

`app.disableDomainBlockingFor3DAPIs()`

By default, Chromium disables 3D APIs (e.g. WebGL) until restart on a per domain basis if the GPU processes crashes too frequently. This function disables that behavior.

Diese Methode kann nur vor dem Start der App aufgerufen werden.

`app.getAppMetrics()`

Returns ProcessMetric[]: Array of ProcessMetric objects that correspond to memory and CPU usage statistics of all the processes associated with the app.

`app.getGPUFeatureStatus()`

Returns GPUFeatureStatus - The Graphics Feature Status from chrome://gpu/.

Note: This information is only usable after the gpu-info-update event is emitted.

`app.getGPUInfo(infoType)`

infoType string - Kann basic oder complete sein.

Gibt das Promise<unknown> zurück

For infoType equal to complete: Promise is fulfilled with Object containing all the GPU Information as in chromium's GPUInfo object. This includes the version and driver information that's shown on chrome://gpu page.

For infoType equal to basic: Promise is fulfilled with Object containing fewer attributes than when requested with complete. Here's an example of basic response:

{
  auxAttributes:
   {
     amdSwitchable: true,
     canSupportThreadedTextureMailbox: false,
     directComposition: false,
     directRendering: true,
     glResetNotificationStrategy: 0,
     inProcessGpu: true,
     initializationTime: 0,
     jpegDecodeAcceleratorSupported: false,
     optimus: false,
     passthroughCmdDecoder: false,
     sandboxed: false,
     softwareRendering: false,
     supportsOverlays: false,
     videoDecodeAcceleratorFlags: 0
   },
  gpuDevice:
   [{ active: true, deviceId: 26657, vendorId: 4098 },
     { active: false, deviceId: 3366, vendorId: 32902 }],
  machineModelName: 'MacBookPro',
  machineModelVersion: '11.5'
}

Using basic should be preferred if only basic information like vendorId or deviceId is needed.

`app.setBadgeCount([count])` Linux macOS

count Integer (optional) - If a value is provided, set the badge to the provided value otherwise, on macOS, display a plain white dot (e.g. unknown number of notifications). On Linux, if a value is not provided the badge will not display.

Returns boolean - Whether the call succeeded.

Sets the counter badge for current app. Setting the count to 0 will hide the badge.

On macOS, it shows on the dock icon. On Linux, it only works for Unity launcher.

Note: Unity launcher requires a .desktop file to work. For more information, please read the Unity integration documentation.

Note: On macOS, you need to ensure that your application has the permission to display notifications for this method to work.

`app.getBadgeCount()` Linux macOS

Returns Integer - The current value displayed in the counter badge.

`app.isUnityRunning()` Linux

Returns boolean - Whether the current desktop environment is Unity launcher.

`app.getLoginItemSettings([options])` macOS Windows

options Object (optional)
- type string (optional) macOS - Can be one of mainAppService, agentService, daemonService, or loginItemService. Standard ist mainAppService. Only available on macOS 13 and up. See app.setLoginItemSettings for more information about each type.
- serviceName string (optional) macOS - The name of the service. Required if type is non-default. Only available on macOS 13 and up.
- path string (optional) Windows - The executable path to compare against. Standardwert ist process.execPath.
- args string[] (optional) Windows - The command-line arguments to compare against. Defaults to an empty array.

If you provided path and args options to app.setLoginItemSettings, then you need to pass the same arguments here for openAtLogin to be set correctly.

Gibt das Object zurück:

openAtLogin boolean - true wenn die App definiert wurde, sich bei Login zu öffnen.
openAsHidden boolean macOS Deprecated - true if the app is set to open as hidden at login. This does not work on macOS 13 and up.
wasOpenedAtLogin boolean macOS - true if the app was opened at login automatically.
wasOpenedAsHidden boolean macOS Deprecated - true if the app was opened as a hidden login item. This indicates that the app should not open any windows at startup. This setting is not available on MAS builds or on macOS 13 and up.
restoreState boolean macOS Deprecated - true if the app was opened as a login item that should restore the state from the previous session. This indicates that the app should restore the windows that were open the last time the app was closed. This setting is not available on MAS builds or on macOS 13 and up.
status string macOS - can be one of not-registered, enabled, requires-approval, or not-found.
executableWillLaunchAtLogin boolean Windows - true if app is set to open at login and its run key is not deactivated. This differs from openAtLogin as it ignores the args option, this property will be true if the given executable would be launched at login with any arguments.
launchItems Object[] Windows
- name string Windows - name value of a registry entry.
- path string Windows - The executable to an app that corresponds to a registry entry.
- args string[] Windows - the command-line arguments to pass to the executable.
- scope string Windows - one of user or machine. Indicates whether the registry entry is under HKEY_CURRENT USER or HKEY_LOCAL_MACHINE.
- enabled boolean Windows - true if the app registry key is startup approved and therefore shows as enabled in Task Manager and Windows settings.

`app.setLoginItemSettings(settings)` macOS Windows

settings Objekt
- openAtLogin boolean (optional) - true to open the app at login, false to remove the app as a login item. Standardwert ist false.
- openAsHidden boolean (optional) macOS Deprecated - true to open the app as hidden. Standardwert ist false. The user can edit this setting from the System Preferences so app.getLoginItemSettings().wasOpenedAsHidden should be checked when the app is opened to know the current value. This setting is not available on MAS builds or on macOS 13 and up.
- type string (optional) macOS - The type of service to add as a login item. Standard ist mainAppService. Only available on macOS 13 and up.
  - mainAppService - The primary application.
  - agentService - The property list name for a launch agent. The property list name must correspond to a property list in the app’s Contents/Library/LaunchAgents directory.
  - daemonService string (optional) macOS - The property list name for a launch agent. The property list name must correspond to a property list in the app’s Contents/Library/LaunchDaemons directory.
  - loginItemService string (optional) macOS - The property list name for a login item service. The property list name must correspond to a property list in the app’s Contents/Library/LoginItems directory.
- serviceName string (optional) macOS - The name of the service. Required if type is non-default. Only available on macOS 13 and up.
- path string (optional) Windows - The executable to launch at login. Standardwert ist process.execPath.
- args string[] (optional) Windows - The command-line arguments to pass to the executable. Defaults to an empty array. Take care to wrap paths in quotes.
- enabled boolean (optional) Windows - true will change the startup approved registry key and enable / disable the App in Task Manager and Windows Settings. Standardwert ist true.
- name string (optional) Windows - value name to write into registry. Defaults to the app's AppUserModelId().

Set the app's login item settings.

To work with Electron's autoUpdater on Windows, which uses Squirrel, you'll want to set the launch path to Update.exe, and pass arguments that specify your application name. Ein Beispiel:

const { app } = require('electron')
const path = require('node:path')

const appFolder = path.dirname(process.execPath)
const updateExe = path.resolve(appFolder, '..', 'Update.exe')
const exeName = path.basename(process.execPath)

app.setLoginItemSettings({
  openAtLogin: true,
  path: updateExe,
  args: [
    '--processStart', `"${exeName}"`,
    '--process-start-args', '"--hidden"'
  ]
})

For more information about setting different services as login items on macOS 13 and up, see SMAppService.

`app.isAccessibilitySupportEnabled()` macOS Windows

Returns boolean - true if Chrome's accessibility support is enabled, false otherwise. This API will return true if the use of assistive technologies, such as screen readers, has been detected. See https://www.chromium.org/developers/design-documents/accessibility for more details.

`app.setAccessibilitySupportEnabled(enabled)` macOS Windows

enabled boolean - Enable or disable accessibility tree rendering

Manually enables Chrome's accessibility support, allowing to expose accessibility switch to users in application settings. See Chromium's accessibility docs for more details. Disabled by default.

This API must be called after the ready event is emitted.

Note: Rendering accessibility tree can significantly affect the performance of your app. It should not be enabled by default.

`app.showAboutPanel()`

Show the app's about panel options. These options can be overridden with app.setAboutPanelOptions(options). This function runs asynchronously.

`app.setAboutPanelOptions(options)`

options Objekt
- applicationName string (optional) - Der Name der App.
- applicationVersion string (optional) - Die Version der App.
- copyright string (optional) - Copyright Information.
- version string (optional) macOS - The app's build version number.
- credits string (optional) macOS Windows - Credit information.
- authors string[] (optional) Linux - List of app authors.
- website string (optional) Linux - The app's website.
- iconPath string (optional) Linux Windows - Path to the app's icon in a JPEG or PNG file format. On Linux, will be shown as 64x64 pixels while retaining aspect ratio. On Windows, a 48x48 PNG will result in the best visual quality.

Set the about panel options. This will override the values defined in the app's .plist file on macOS. See the Apple docs for more details. On Linux, values must be set in order to be shown; there are no defaults.

If you do not set credits but still wish to surface them in your app, AppKit will look for a file named "Credits.html", "Credits.rtf", and "Credits.rtfd", in that order, in the bundle returned by the NSBundle class method main. The first file found is used, and if none is found, the info area is left blank. See Apple documentation for more information.

`app.isEmojiPanelSupported()`

Returns boolean - whether or not the current OS version allows for native emoji pickers.

`app.showEmojiPanel()` macOS Windows

Show the platform's native emoji picker.

`app.startAccessingSecurityScopedResource(bookmarkData)` MAS

bookmarkData string - The base64 encoded security scoped bookmark data returned by the dialog.showOpenDialog or dialog.showSaveDialog methods.

Returns Function - This function must be called once you have finished accessing the security scoped file. If you do not remember to stop accessing the bookmark, kernel resources will be leaked and your app will lose its ability to reach outside the sandbox completely, until your app is restarted.

const { app, dialog } = require('electron')
const fs = require('node:fs')

let filepath
let bookmark

dialog.showOpenDialog(null, { securityScopedBookmarks: true }).then(({ filePaths, bookmarks }) => {
  filepath = filePaths[0]
  bookmark = bookmarks[0]
  fs.readFileSync(filepath)
})

// ... restart app ...

const stopAccessingSecurityScopedResource = app.startAccessingSecurityScopedResource(bookmark)
fs.readFileSync(filepath)
stopAccessingSecurityScopedResource()

Start accessing a security scoped resource. With this method Electron applications that are packaged for the Mac App Store may reach outside their sandbox to access files chosen by the user. See Apple's documentation for a description of how this system works.

`app.enableSandbox()`

Aktiviert den vollen Sandbox-Modus auf der App. This means that all renderers will be launched sandboxed, regardless of the value of the sandbox flag in WebPreferences.

Diese Methode kann nur vor dem Start der App aufgerufen werden.

`app.isInApplicationsFolder()` macOS

Returns boolean - Whether the application is currently running from the systems Application folder. Use in combination with app.moveToApplicationsFolder()

`app.moveToApplicationsFolder([options])` macOS

options Object (optional)
- conflictHandler Funktion<boolean> (optional) - A handler for potential conflict in move failure.
  - conflictType string - The type of move conflict encountered by the handler; can be exists or existsAndRunning, where exists means that an app of the same name is present in the Applications directory and existsAndRunning means both that it exists and that it's presently running.

Returns boolean - Whether the move was successful. Please note that if the move is successful, your application will quit and relaunch.

No confirmation dialog will be presented by default. If you wish to allow the user to confirm the operation, you may do so using the dialog API.

NOTE: This method throws errors if anything other than the user causes the move to fail. For instance if the user cancels the authorization dialog, this method returns false. If we fail to perform the copy, then this method will throw an error. The message in the error should be informative and tell you exactly what went wrong.

By default, if an app of the same name as the one being moved exists in the Applications directory and is not running, the existing app will be trashed and the active app moved into its place. If it is running, the preexisting running app will assume focus and the previously active app will quit itself. This behavior can be changed by providing the optional conflict handler, where the boolean returned by the handler determines whether or not the move conflict is resolved with default behavior. i.e. returning false will ensure no further action is taken, returning true will result in the default behavior and the method continuing.

Ein Beispiel:

const { app, dialog } = require('electron')

app.moveToApplicationsFolder({
  conflictHandler: (conflictType) => {
    if (conflictType === 'exists') {
      return dialog.showMessageBoxSync({
        type: 'question',
        buttons: ['Halt Move', 'Continue Move'],
        defaultId: 0,
        message: 'An app of this name already exists'
      }) === 1
    }
  }
})

Would mean that if an app already exists in the user directory, if the user chooses to 'Continue Move' then the function would continue with its default behavior and the existing app will be trashed and the active app moved into its place.

`app.isSecureKeyboardEntryEnabled()` macOS

Returns boolean - whether Secure Keyboard Entry is enabled.

Standardmäßig wird diese API false zurückgeben.

`app.setSecureKeyboardEntryEnabled(enabled)` macOS

enabled boolean - Aktiviert oder deaktiviert Secure Keyboard Entry

Set the Secure Keyboard Entry is enabled in your application.

By using this API, important information such as password and other sensitive information can be prevented from being intercepted by other processes.

See Apple's documentation for more details.

Note: Enable Secure Keyboard Entry only when it is needed and disable it when it is no longer needed.

`app.setProxy(config)`

config ProxyConfig

Returns Promise<void> - Resolves when the proxy setting process is complete.

Sets the proxy settings for networks requests made without an associated Session. Currently this will affect requests made with Net in the utility process and internal requests made by the runtime (ex: geolocation queries).

This method can only be called after app is ready.

`app.resolveProxy(url)`

url URL

Returns Promise<string> - Resolves with the proxy information for url that will be used when attempting to make requests using Net in the utility process.

Eigenschaften

`app.accessibilitySupportEnabled` macOS Windows

A boolean property that's true if Chrome's accessibility support is enabled, false otherwise. This property will be true if the use of assistive technologies, such as screen readers, has been detected. Setting this property to true manually enables Chrome's accessibility support, allowing developers to expose accessibility switch to users in application settings.

See Chromium's accessibility docs for more details. Disabled by default.

This API must be called after the ready event is emitted.

Note: Rendering accessibility tree can significantly affect the performance of your app. It should not be enabled by default.

`app.applicationMenu`

A Menu | null property that returns Menu if one has been set and null otherwise. Users can pass a Menu to set this property.

`app.badgeCount` Linux macOS

An Integer property that returns the badge count for current app. Setting the count to 0 will hide the badge.

On macOS, setting this with any nonzero integer shows on the dock icon. On Linux, this property only works for Unity launcher.

Note: Unity launcher requires a .desktop file to work. For more information, please read the Unity integration documentation.

Note: On macOS, you need to ensure that your application has the permission to display notifications for this property to take effect.

`app.commandLine` Readonly

A CommandLine object that allows you to read and manipulate the command line arguments that Chromium uses.

`app.dock` macOS Readonly

A Dock | undefined object that allows you to perform actions on your app icon in the user's dock on macOS.

`app.isPackaged` Readonly

Eine boolean Eigenschaft, die true zurückgegeben, wenn die App gepackt ist, ansonsten false. Für viele Apps kann diese Eigenschaft verwendet werden, um Entwicklungs- und Produktionsumgebungen zu unterscheiden.

`app.name`

A string property that indicates the current application's name, which is the name in the application's package.json file.

`app.userAgentFallback`

A string which is the user agent string Electron will use as a global fallback.

This is the user agent that will be used when no user agent is set at the webContents or session level. It is useful for ensuring that your entire app has the same user agent. Set to a custom value as early as possible in your app's initialization to ensure that your overridden value is used.

`app.runningUnderARM64Translation` Readonly macOS Windows

A boolean which when true indicates that the app is currently running under an ARM64 translator (like the macOS Rosetta Translator Environment or Windows WOW).

You can use this property to prompt users to download the arm64 version of your application when they are mistakenly running the x64 version under Rosetta or WOW.

Ereignisse
Methoden
Eigenschaften

Ereignisse​

Event: 'will-finish-launching'​

Event: 'ready'​

Event: 'window-all-closed'​

Event: 'before-quit'​

Event: 'before-quit'​

Event: 'quit'​

Event: 'open-file' macOS​

Event: 'open-url' macOS​

Event: 'activate' macOS​

Event: 'did-become-active' macOS​

Event: 'did-resign-active' macOS​

Event: 'continue-activity' macOS​

Event: 'will-continue-activity' macOS​

Event: 'continue-activity-error' macOS​

Event: 'activity-was-continued' macOS​

Event: 'update-activity-state' macOS​

Event: 'new-window-for-tab' macOS​

Event: 'browser-window-blur'​

Event: 'browser-window-focus'​

Event: 'browser-window-created'​

Event: 'web-contents-created'​

Event: 'certificate-error'​

Event: 'select-client-certificate'​

Event: 'login'​

Event: 'gpu-info-update'​

Event: 'render-process-gone'​

Event: 'child-process-gone'​

Event: 'accessibility-support-changed' macOS Windows​

Event: 'session-created'​

Event: 'second-instance'​

Methoden​

app.quit()​

app.exit([exitCode])​

app.relaunch([options])​

app.isReady()​

app.whenReady()​

app.focus([options])​

app.hide() macOS​

app.isHidden() macOS​

app.show() macOS​

app.setAppLogsPath([path])​

app.getAppPath()​

app.getPath(name)​

app.getFileIcon(path[, options])​

app.setPath(name, path)​

app.getVersion()​

app.getName()​

app.setName(name)​

app.getLocale()​

app.getLocaleCountryCode()​

app.getSystemLocale()​

app.getPreferredSystemLanguages()​

app.addRecentDocument(path) macOS Windows​

app.clearRecentDocuments() macOS Windows​

app.setAsDefaultProtocolClient(protocol[, path, args])​

app.removeAsDefaultProtocolClient(protocol[, path, args]) macOS Windows​

app.isDefaultProtocolClient(protocol[, path, args])​

app.getApplicationNameForProtocol(url)​

app.getApplicationInfoForProtocol(url) macOS Windows​

app.setUserTasks(tasks) Windows​

app.getJumpListSettings() Windows​

app.setJumpList(categories) Windows​

app.requestSingleInstanceLock([additionalData])​

app.hasSingleInstanceLock()​

app.releaseSingleInstanceLock()​

app.setUserActivity(type, userInfo[, webpageURL]) macOS​

app.getCurrentActivityType() macOS​

app.invalidateCurrentActivity() macOS​

app.resignCurrentActivity() macOS​

app.updateCurrentActivity(type, userInfo) macOS​

app.setAppUserModelId(id) Windows​

app.setActivationPolicy(policy) macOS​

app.importCertificate(options, callback) Linux​

app.configureHostResolver(options)​

app.disableHardwareAcceleration()​

app.disableDomainBlockingFor3DAPIs()​

app.getAppMetrics()​

app.getGPUFeatureStatus()​

app.getGPUInfo(infoType)​

Ereignisse

Event: 'will-finish-launching'

Event: 'ready'

Event: 'window-all-closed'

Event: 'before-quit'

Event: 'before-quit'

Event: 'quit'

Event: 'open-file' macOS

Event: 'open-url' macOS

Event: 'activate' macOS

Event: 'did-become-active' macOS

Event: 'did-resign-active' macOS

Event: 'continue-activity' macOS

Event: 'will-continue-activity' macOS

Event: 'continue-activity-error' macOS

Event: 'activity-was-continued' macOS

Event: 'update-activity-state' macOS

Event: 'new-window-for-tab' macOS

Event: 'browser-window-blur'

Event: 'browser-window-focus'

Event: 'browser-window-created'

Event: 'web-contents-created'

Event: 'certificate-error'

Event: 'select-client-certificate'

Event: 'login'

Event: 'gpu-info-update'

Event: 'render-process-gone'

Event: 'child-process-gone'

Event: 'accessibility-support-changed' macOS Windows

Event: 'session-created'

Event: 'second-instance'

Methoden

`app.quit()`

`app.exit([exitCode])`

`app.relaunch([options])`

`app.isReady()`

`app.whenReady()`

`app.focus([options])`

`app.hide()` macOS

`app.isHidden()` macOS

`app.show()` macOS

`app.setAppLogsPath([path])`

`app.getAppPath()`

`app.getPath(name)`

`app.getFileIcon(path[, options])`

`app.setPath(name, path)`

`app.getVersion()`

`app.getName()`

`app.setName(name)`

`app.getLocale()`

`app.getLocaleCountryCode()`

`app.getSystemLocale()`

`app.getPreferredSystemLanguages()`

`app.addRecentDocument(path)` macOS Windows

`app.clearRecentDocuments()` macOS Windows

`app.setAsDefaultProtocolClient(protocol[, path, args])`

`app.removeAsDefaultProtocolClient(protocol[, path, args])` macOS Windows

`app.isDefaultProtocolClient(protocol[, path, args])`

`app.getApplicationNameForProtocol(url)`

`app.getApplicationInfoForProtocol(url)` macOS Windows

`app.setUserTasks(tasks)` Windows

`app.getJumpListSettings()` Windows

`app.setJumpList(categories)` Windows

`app.requestSingleInstanceLock([additionalData])`

`app.hasSingleInstanceLock()`

`app.releaseSingleInstanceLock()`

`app.setUserActivity(type, userInfo[, webpageURL])` macOS

`app.getCurrentActivityType()` macOS

`app.invalidateCurrentActivity()` macOS

`app.resignCurrentActivity()` macOS

`app.updateCurrentActivity(type, userInfo)` macOS

`app.setAppUserModelId(id)` Windows

`app.setActivationPolicy(policy)` macOS

`app.importCertificate(options, callback)` Linux

`app.configureHostResolver(options)`

`app.disableHardwareAcceleration()`

`app.disableDomainBlockingFor3DAPIs()`

`app.getAppMetrics()`

`app.getGPUFeatureStatus()`

`app.getGPUInfo(infoType)`